新华彩票

称重传感器

称重传感器
称重传感器

产品类别

联系方式

电话:0755-26738591

传真:0755-26998440

网址:新华彩票http://www.hsmczz.com

邮箱:sales@octsources。com

地址:深圳市南山区科技园南海大道4050号

产品类别 > 新型及特殊控制器 > PCS-100 PCS-250控制系统

PCS-100 PCS-250控制系统

所属品牌:日本PMT断刀检测器,传感器 来源:深圳市现代豪方仪器仪表点击:5500次发布时间:2012-11-09

PCS-100 PCS-250控制系统


BROKEN TOOL SENSOR

On the basis of years of experience and sales volume, the quality and performance of PCS-100 and 250 have been improved to meet various demand from the customers. Resistibility against chemicals, coolant invasion, and electro-magnetic wave have been greatly improved. Newly added Lo-Lo setting makes the sensor available for small dia. of tools.

●Outline
  • In automatic or unattended machining, it is imperative to detect the broken tool when it took place. If it's left undetected, a huge loss of cost will be caused from such as scrap parts, machine damage and machine's downtime. It can be easily installed in the machine at an affordable cost, and detect the breakage of drill, tap and reamer.
  • The sensor is bracket-mounted close to the tool easily and conveniently. A needle is arranged in different length and, and can be bent so that the sensor would be installed near by the tool flexibly even though the space around the tool is tight and limited. SCU control unit is installed in the machine control cabinet.
  • PCS-100: If the tool is present, a needle will contact the tip and return to the starting position, and the machining goes on. If the tool is broken, a needle will swing past the tool and interpret the condition as a broken tool. In this case, the FAULT signal is transmitted to the machine, and the machining is stopped.
    PCS-250: It monitors the angle input by "teaching" operation, and output OK or FAULT signal.
  • High durability under the use of coolant and severe condition.(IP67)
  • Due to the gear-less design, PCS is very strong against the shock and vibration. Strong enough against 3 shift operation for its high durability and rigidity.


●PCS-100 System Component parts
Contact sensor PCS-100 with needle ass'y
Control unit SCU-100
Connecting cable Std. 5m w/L90 Connector


UP
●PCS-250 System Component parts
Contact sensor PCS-250 with needle ass'y
Control unit TCU-250
Connecting cable Std. 5m w/L90 Connector


UP

Specifications
  Contact sensor PCS-100 Contact sensor PCS-250
Housing Anodized Aluminum
Needle swing Swing range 5-175°
mechanically adjustable
Electronically learned swing range up to 300°
Completely diagnostic system.
Needle Max Life needle in standard
length 140mm Long needle 200mm
Motor drive Direct drive (no gear box) DC motor
Sealing Sealed against liquid and solid contaminants. rating IP-67
Cable 90° or straight, moulded 4 pin connector.
Standard length 5m, Maximum 50m

exception (5 pin connector)
  Control unit SCU-100 Control unit TCU-250
Operating voltage 24VDC
Max. current 250mA
Operating Temp 0-55℃
Housing Material PolycarbUL94V1
Max. wire size 12AWG
Mounting 35mm DIN Rail
OK FAULT relay DRY CONTCT CONTCT RATING
2A@250VAC
Additional functions Changeable to Reverse logic for space monitoring ・Remote teaching termiral as well as Teach button equipped.
・Normal Tolerance-NT Extended Tolerance-ET select swich.


浏览了该产品的用户还浏览:

PCS-100 PCS-250控制系统

全中彩票app 大有彩票开户 爱投彩票 卓易彩票 乐彩网导航